ELEVATING PLATFORM SCAFFOLD SYSTEMS

SPECIFICATIONS (1999)

This specification supersedes all prior models

1 ... GENERAL DESCRIPTION

The ELEFORM scaffold system is an Elevating Platform Scaffold, Access and Safety system. The main components of the system are manufactured using 350/450 grade RHS and SHS steel sections. All systems are manufactured to the relevant Australian Manufacturing Standards and are tested to comply with the following standards and specifications;
                                AS 1554     AS 1418.10        AS 1576.1
                                AS 1664     AS 1250             AS 1657
All exposed components are are hot dip galvanised.
All tolerances regarding; Straightness, Thickness, Dimension, Length and Weight refer to Australian Standards.
The ELEFORM system is classed as a Scaffold Assembly and holds QID Plant Design Registration No D009960 (19/Feb/96) as well as Q19758 and Q19862 under Section 23, Workplace Health and Safety Regulation 1989. ELEFORM scaffold systems are protected under the following International Patent Nos., PN9831, P02666, PCT/AU95/OO374. AUSTRALIAN PAT. 673495, 671068, 675200, 671067, 672167, 673801, 44486/99                                                                                                                                  

2... SYSTEM DETAILS

 Standard Platform Width     3 Board (225 mm)              825 mm
4 Board                              1050 mm
Standard Platform Lengths  3m,4m, 5m&6m.
Corner Access Platforms     Square                                1050 mm
Standard Columns               Per length x 100 mm SHS     3900 mm
Extension Legs                   1 per column x 89 mm SHS   3100 mm
Handrail Height                   Include mid rail                   1000 mm
Mesh guard detail                4.2mm x 50 mm squares as required.
Max. Inclination                   (working angle)                  7 degrees.
Standard Chain Winch        Beaver 3G x 1 tonne SWL
6 mm Alloy load chain T80
Hook x swivel type.
Rated Capacity                    Per bay to 6m                      675 kgs.
Heavy Duty
Rated Capacity                    Corner Access Platform      220 kgs
Light Duty

KS2000 Series                     KS3000 Series
(Attached)                            ( Freestanders)
Max. working height              10-18m                                      8m
Base Frame width                                                                     2.4m
Ext. Column to workface        950 mm (recommended)
Wall mounts                            1 per column (adjustable)
Roof mounts                            1 per column (adjustable)
Unit Weight                           450 kgs per bay max.                 3m unit x 600kgs
6m unit x 130kgs
Castors                                   Hard stand use only                    4 per unit
200 mm steel/poly
400kgs rated.
Adjustable screw jacks           Hard stand use                             4 per unit x 750 mm

NOTE: ELEFORM AUSTRALIA reserves the right to review, upgrade and modify this specification without notice.
ELEFORM safety guidelines will be provided with all systems and must be conformed to. Erection, use, maintenance and disassembly must conform to current ELEFORM Safety Guidelines in addition to all relevant National Codes of Practice and applicable legislation in State where ELEFORM systems are in use.

Additional instructions and technical assistance is available from ELEFORM relating to the following; Load Capacities, Planking, Bracing and tying. Typical access, Parts Identification, Engineering Assistance. PLEASE DO NOT HESITATE TO CONTACT ELEFORM REGARDING ADVICE OR QUOTES ON CUSTOMISED OR SPECIALIST APPLICATIONS.